Finishing Tools and Abrasives
Finishing tools smooth surfaces and define the shape of prosthetic and orthotic components, insoles and corsets.
- Sanding drums, cylindrical 65 x 90 mm and 45 x 70 mm; rubber drum 73 x 194 mm
- Sanding hoods 65 x 90, 45 x 70 and 73 x 194 mm in grit 40, 60 and 80
- Abrasive paper rolls H50 in grit 40, 60, 80 and 100
- Grinding rasps with M16 thread: 30 x 70, 36 x 40, 40 x 50, 50 x 60 and 50 x 85 mm
- Sanding cones, conical sleeves, caps and cap sleeves with M16 thread; sanding sleeves 200 x 73 mm in grit 40 and 60
- Fine milling cutter; conical drill bit; cutting disc saw
- Hand lever metal shears; high speed press; leather paring and trimming machine
- Eyelet machine and eyelet pliers; revolving hole punch; number and letter punch sets
| Code | Description |
| 22.003.02.P | Sanding cone M16 thread |
| 22.003.02.Q | Sanding sleeve conical M16 thread |
| 22.003.02.R | Sanding cap M16 thread |
| 22.003.02.S | Sanding cap sleeve M16 thread |
| 22.003.02.T | Sanding sleeve 200x73mm GRIT 60 |
| 22.003.02.U | Sanding sleeve 200×73 GRIT40 |
| 22.003.02.U80 | Sanding sleeve 200×73 mm GRIT80 |
| 22.003.02.V | Sanding cap 40×70 mm GRIT40 |
| 22.003.07 | Abrasive flap wheel M16 mm |
| 22.003.14 | Steel wire sanding drum hole d16mm |
| 22.003.14.A | Threaded connector with two fitting disks, thread diameter M16 mm |
| 22.003.15 | Sandpaper disc self-adhesive diameter 350 mm GRIT40 |
| 22.003.10 | Sanding belt 50×2500 GRIT120 |
| 22.003.11 | Sanding belt 17×1400 mm |
| 22.003.12.24 | Sanding belt 40×1650 mm GRIT 24 |
| 22.003.12.60 | Sanding belt 40×1650 mm GRIT 60 |
| 22.003.13.24 | Sanding belt 100×1480 mm GRIT 24 |
| 22.003.13.60 | Sanding belt 100×1480 mm GRIT 60 |
| 22.003.16 | Lapping roller thread diameter M16 mm width 80 mm |
| 22.003.03 | Fine milling cutter |
| 22.003.05 | Conical drill bit |
| 22.003.06 | Cutting disc saw |
| Code | Description |
| 22.018.02 | Hand level metal shears |
| 22.006.58 | High speed press |
| Code | Description |
| 22.011.01 | Leather paring and trimming machine |
| Code | Description |
| 22.006.22 | Eyelet machine |
| Code | Description |
| 22.007.13 | Revolving hole punch |
| 22.006.55 | Number punch set |
| 22.006.56 | Letter punch set |
| 22.006.57 | Eyelet pliers |
Key specifications
| Device Category | Finishing tools and abrasives |
| Product Code Series | 22.003.02, 22.003.05, 22.003.06, 22.006.55-58 |
| Sanding Drum Sizes | 65 x 90 mm; 45 x 70 mm; rubber drum 73 x 194 mm |
| Sanding Hood Grits | 40, 60, 80 |
| Abrasive Paper Grits | 40, 60, 80, 100 |
| Grinding Rasp Sizes | 30 x 70; 36 x 40; 40 x 50; 50 x 60; 50 x 85 mm |
| Thread | M16 |
| Additional Tools | Fine milling cutter; conical drill bit; cutting disc saw; metal shears; high speed press; leather paring and trimming machine; eyelet machine and pliers; hole punch; number and letter punch sets |
| Laboratory Area | Finishing |
Ordering and technical support
Supplied by Roadrunnerfoot Engineering S.r.l., Pregnana Milanese, Italy. The full range is listed in the Roadrunnerfoot 2025 catalogue. Orthopedic technicians, clinics and international distributors can request technical data sheets, product codes, pricing and fitting support from our team.