Floor Carver for Orthopedic Workshop

Floor Carver

The floor carver is a machine for finishing prosthetic sockets, orthoses, below and above knee cosmetic foams, positive plaster models, corsets and insoles.

• Fully adjustable tilt arm milling
• Adjustable speed with electronic inverter and potentiometer
• Horizontal motor
• For finishing sockets, orthoses, cosmetic foams, plaster models, corsets and insoles
• Belongs to the finishing area of an orthopedic laboratory
• Code 22.003.01

FLOOR CARVER is a machine to finishing prosthetic socket, orthesis, cosmetic foam BK and AK, positive chalk model of stump, corset, insoles. Floor carver has ffully adjustable tilt arm milling. Floor carver has adjustable speed with electronic inverter and potentiometer. Horizontal motor with 75 x 200 mm abrasive pad M16 thread and T22 abrasive cone at the head of the shaft Activation with foot switch. Provision for connection to a centralized suction system, diameter 150 mm on the side. Suction mouth behind the adjustable pad. Machine dimension is   Width 1100 mm,  Depth 600 mm and Height 1500 mm. The weight machine is 140 Kg. ELECTRIC POWER SUPPLY can be Single phase 230V  and frequency 50Hz with inverter or Three phase 400V  and frequency 50Hz with inverter. You can choose the accessories on page finishing tools with all type of sanding drum, sanding hood, sanding cap, sending sleeves and sanding belt.

If you need other machines

If you need technical support on our you tube channel

Key specifications

Ordering and technical support

Supplied by Roadrunnerfoot Engineering S.r.l., Pregnana Milanese, Italy. The full range is listed in the Roadrunnerfoot 2025 catalogue. Orthopedic technicians, clinics and international distributors can request technical data sheets, product codes, pricing and fitting support from our team.