Thermoformable Cone is a cone that orthopedic technician can to customize liner on stump positive model by oven thermoforming. We have different sizes: small, medium, large. Check the circumference of the positive stump model and verify that thermoformable cone is possible to use in this case. Set the oven to 170°C and put the thermoformable cone into the oven about 5 minutes, preferably vertically. If this not possible, place the liner flatly ana Teflon sheet. Before thermoforming, be sure that the material of thermoformable cone is well softened. Tie the material firmly up around the vacuum tube and check that occurring folds will not hinder the liner finish. Wait as long as necessary to have the liner cooled. Then cut the liner. Removal is easy when the material is cold enough. The material of thermoformable cone is easily to cut and can be sanded without problem.
Thermoformable Cone
Thermoformable Cone is a cone that orthopedic technician can to customize liner on stump positive model by oven thermoforming. We have different sizes
| Code | Size |
| 3.004.01.D13 | Small |
| 3.004.01.D16 | Medium |
| 3.004.01.D18 | Large |